B-3961 recessed paper roll dispenser-waste bin of satin brushed stainless steel

Bobrick 3961 convertible recessed paper towel dispenser and waste receptacle

Touch-Free roll towel dispensing mechanism one 12" (300mm) length of paper towel per pull and operates smoothly and quietly. User only touches the paper. Exterior paper towel feed wheel available for use when filling dispenser and for user to advance paper should it become necessary to feed paper through dispenser. Automatic transfer dispenses stub roll before new roll is dispensed. When stub roll is depleted, advancement of paper towel feed wheel allows the main roll to start dispensing without the need to open the dispenser. Dispenser accommodates up to 8" (205mm) wide, 8" (205mm) diameter, non perforated paper towel rolls and dispenses with less than 5 pounds of force (22.2 N) to comply with barrier-free accessibility guidelines (including ADAAG in U.S.A.).

Provide framed rough wall opening 15-7/8" wide x 54-3/4" high (403 x 1390mm). Minimum recessed depth required to finish face of wall is 4" (100mm). Allow clearance for construction features that may protrude into opening from opposite wall. Coordinate with mechanical engineer to avoid pipes, vents, and conduits. If unit projects above top of wainscot, provide aluminum channel or other filler to eliminate gap between flange and finish face of wall. Mount unit in wall opening with shims between framing and cabinet at all points indicated by an S, then secure unit with #8 x 1-1/4" sheet-metal screws (not furnished).

Cabinet is not replaced when changing modules. Satin-finish stainless steel. Seamless beveled flange. Touch-free, pull-towel mechanism dispenses 12" (305mm) length per pull of universal roll paper towels. Accommodates 8" (205mm) wide, up to 8" (205mm) diameter rolls, 800 ft (244m) long, plus 3 1⁄2" (90mm) diameter stub roll with automatic transfer. Removable waste receptacle is locked into cabinet. Receptacle is 8" (205mm) deep with capacity of 12‑gal. (45.5‑L); extends 4 1⁄8" (105mm) from wall. Rough Wall Opening: 16" W, 54 3⁄4" H, 4" min. depth (405 x 1390 x 100mm).

- Recessed convertible touch-free roll towel dispenser and waste receptacle shall be type 304 stainless steel with welded construction; exposed surfaces shall have satin finish.
- Flange shall be drawn and beveled, one-piece, seamless construction.
- Door shall be secured to cabinet with a full-length stainless steel piano-hinge and equipped with a tumbler lock keyed like other Bobrick washroom accessories.
- Towel mechanism accommodates up to 8" (205mm) wide, 8" (205mm) diameter, nonperforated paper towel rolls
- 800 ft (244mm) long.
- Touch-Free pull towel mechanism dispenses one 12" (300mm) length of towel per pull.
- User only touches the paper.
- Automatic transfer shall dispense stub roll up to 3-1/2" (90mm) diameter before new roll is dispensed.<
- Equipped with paper towel feed wheel for use in filling the dispenser, or for user to advance paper should it become necessary to feed paper through dispenser.
- Paper towels are dispensed with pull force of less than 5 pounds (22.2 N) to comply with barrier-free accessibility guidelines (including ADAAG in U.S.A.).
- Removable waste receptacle shall be secured to cabinet with a tumbler lock, have front and side edges of bottom and all top edges hemmed for safe handling, and shall have a minimum capacity of 12-gal. (45.5-L).

Dimesnions:
width: 437mm
height: 1422mm
depth in wall: 100mm
headtstart: 130mm
disabled mounting height: 1537mm

wall opening:
width: 406mm
height: 1391mm
depth in wall: 102mm
headstart: n.z.
disabled mounting height: 1511mm

Data sheet


Instructions