B-4354 satin finish Feminine hygiene waste container 2.7L for partition mounting
Bobrick B-4354 partition mounted sanitary napkin disposal satin-finish stainless steel. Mounts in toilet partition 1⁄2–1 1⁄4" (13–32mm) thick. Self-closing doors pull down with less than 5 lbs of force (22.2 N) for access to disposal. Removable, leak-proof, 0.7-gal. (2.7-L) plastic receptacle. Rough Partition Opening: 11" W, 9 3⁄8" H (280 x 240mm).
| Hoeveelheid | Prijs per eenheid |
|---|---|
| Tot 1 |
€ 574,10
|
| Vanaf 2 |
€ 566,20
|
| Vanaf 3 |
€ 558,30
|
| Vanaf 4 |
€ 550,40
|
| Vanaf 5 |
€ 542,45
|
| Vanaf 6 |
€ 534,55
|
| Vanaf 8 |
€ 526,75
|
| Vanaf 10 |
€ 518,85
|
voor levering naar Nederland.
Beschikbaar, Levertijd 6-10 werkdagen
55 Goswell Road 1st Floor Clerkenwell
EC1V 7EN London
Ierland
euoffice@bobrick.com
Herbert Place 25
D02 AY86 Dublin
Ireland
Telephone: +44 (0) 1793 78 45 45
euoffice@bobrick.com
Bobrick B-4354 partition mounted sanitary napkin disposal of stainless steel
Serves two toilet compartments. Self-closing doors pull down for access to disposal with less than 5 pounds of force (22.2 N) to comply with barrier-free accessibility guidelines (including ADAAG in U.S.A.). Receptacle is removable from either side of unit for servicing. Cable door-swing limiters prevent damage to washroom accessories and walls. Hanging sight-barrier swings out of the way when waste is deposited in receptacle and when removing receptacle from unit for servicing.
- Partition-mounted sanitary napkin disposal shall be type-304 stainless steel with all-welded construction; exposed surfaces shall have satin finish.
- Unit shall mount in partition and serve two toilet compartments.
- Front of sanitary napkin disposal doors shall have same degree of arc and match other Bobrick ConturaSeries accessories in the washroom.
- Radius on corners and edges of flanges and doors shall complement other Bobrick ConturaSeries washroom accessories.
- Flanges shall be drawn, one-piece, seamless construction.
- Each self-closing door shall be drawn, one-piece, seamless construction; secured to flange with a full-length stainless steel piano-hinge; and equipped with two stainless steel cable door-swing limiters, a finger-pull recess at top for easy opening, and an international graphic symbol identifying sanitary napkin disposal.
- Doors shall pull down with less than 5 pounds of force (22.2 N) to comply with barrier-free accessibility guidelines (including ADAAG in U.S.A.).
- Unit shall be furnished with a removable, leak-proof, molded polyethylene receptacle that is serviced from either side of unit.
- Receptacle shall have a capacity of 0.7-gal. (2.7-L).
- Unit is furnished with a hanging sight-barrier, secured to flange with two stainless steel piano-hinges, which swings out of the way when waste is deposited in receptacle and when removing receptacle from unit for servicing.
Dimensions:
width: 325 mm
height: 280 mm
partition wall thickness: 13 - 32 mm
headstart: 38 mm
typical mounting height: 785 mm
partition wall opening:
width: 280 mm
height: 240
typical mounting height: 760 mm
Data sheet
- width: 325 mm height: 280 mm partition wall thickness: 13 - 32 mm headstart: 38 mm
- typical mounting height: 785 mm
- partition wall opening: width: 280 mm height: 240
- typical mounting height: 760 mm
- Partition-mounted sanitary napkin disposal shall be type-304 stainless steel with all-welded construction; exposed surfaces shall have satin finish.
- Unit shall mount in partition and serve two toilet compartments.
- Front of sanitary napkin disposal doors shall have same degree of arc and match other Bobrick ConturaSeries accessories in the washroom.
- Radius on corners and edges of flanges and doors shall complement other Bobrick ConturaSeries washroom accessories.
- Flanges shall be drawn, one-piece, seamless construction.
Ähnliche Artikel
