B-43644 satin finish stainless steel recessed waste receptacle with LinerMate

Bobrick B-43644 recessed waste receptacle with LinerMate of stainless steel

To insert disposable plastic trash bag, lift LinerMate bag holder up and forward and rest over edge of waste receptacle front panel with the bottom notches of LinerMate engaged on top front edge of receptacle. Place plastic trash bag inside LinerMate and fold plastic bag over LinerMate sleeve. Tie a knot in the corner of the bag, then place LinerMate with plastic trash bag back into receptacle. To empty, gather disposable plastic trash bag from LinerMate bag holder sleeve and lift bag up. Front of waste receptacle panel is removable for cleaning cabinet interior.

- Recessed waste receptacle shall be type-304 stainless steel with all-welded construction; exposed surfaces shall have satin finish.
- Front of waste receptacle shall have same degree of arc and match other Bobrick ConturaSeries accessories in the washroom.
- Radius on corners and edges of flange and waste receptacle shall complement other Bobrick ConturaSeries washroom accessories.
- Flange shall be drawn, one-piece, seamless construction
- Waste receptacle shall have a formed, one-piece, seamless, removable front panel with top edge hemmed.
- Waste receptacle shall be equipped with LinerMate to facilitate installation and removal of disposable trash liners and retains liner inside waste receptacle.
- LinerMate trash liner holder is fabricated with a molded plastic bag holder sleeve and a 20-gauge (0.91mm) stainless steel, U-shaped support strap; riveted construction.
- Bag holder shall have an arc at front and same shape as inside of waste receptacle area.
- Capacity of waste receptacle shall be 12.8-gal. (48.3-L).

Technical data:
Wall:
Width: 403mm
Height: 667mm
Installation depth: 102mm
Protrusion: n.z.

Semi-recessed:
Width: 440mm
Height: 705mm
Installation depth: 100mm
Protrusion: 130mm

Data sheet