B-543 WC Bobrick paper roll holder of stainless steel availbale in 2 versions
Bobrick B-543 Surface-Mounted Single Roll Toilet Tissue Dispenser of satin brushed or polished finish stainless steel. For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws (not furnished).
| Hoeveelheid | Prijs per eenheid |
|---|---|
| Tot 1 |
€ 83,75
|
| Vanaf 2 |
€ 82,60
|
| Vanaf 3 |
€ 81,45
|
| Vanaf 4 |
€ 80,30
|
| Vanaf 5 |
€ 79,10
|
| Vanaf 6 |
€ 78,00
|
| Vanaf 8 |
€ 76,85
|
| Vanaf 10 |
€ 75,70
|
voor levering naar Nederland.
Beschikbaar, Levertijd 6-10 werkdagen
55 Goswell Road 1st Floor Clerkenwell
EC1V 7EN London
Ierland
euoffice@bobrick.com
Herbert Place 25
D02 AY86 Dublin
Ireland
Telephone: +44 (0) 1793 78 45 45
euoffice@bobrick.com
Bobrick B-543 toilet paper roll holder available in 2 versions of stainless steel
Satin-finsih stainless steel. Threaded Ԁange conceals mounting plate, provides snug fit to the wall. Accepts standard-core size from 3⁄4" (20mm) up to 1 1⁄2" (40mm) and 4" (100mm) wide. Set screw in post prevents vandalism. Flange width 2" (50mm). Overall width 5 1⁄2" (140mm). Height 4 1⁄2" (115mm). Unit projects 1 5⁄8" (35mm) from wall.
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws (not furnished). For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws (not furnished), or provide 3mm (1/8") toggle bolts or expansion bolts. For partitions with particle-board or other solid core, secure with sheet-metal screws (not furnished), or provide through-bolts, nuts, and washers. For hollow-core metal partitions, provide solid backing into which the sheet-metal screws (not furnished) can be secured. Available in 2 Versions, satin brushed or polished finish stainless steel.
Dimensions:
width: 140 mm
height: 115 mm
depth: 33 mm
Typical mounting height: 597 mm
- Toilet Tissue Dispenser shall be type-304 stainless steel (insert one satin finish or bright polished) finish.
- Toilet Tissue Dispenser shall have 19mm (3/4") diameter Post.
- Dispenser bar shall be 9.5mm (3/8") diameter, secured to Post with a concealed set screw allowing for right or left handed assembly.
- Retaining pin shall be 6.4mm (1/4") diameter and pressed into Dispenser bar.
- Concealed mounting flange shall be 5.6mm (7/32") thick stainless steel plate, 46mm (1-13/16") outside diameter and equipped with two screw holes for attachment and thread on outside edge to fasten cover.
- Threaded flange cover shall be 1.4mm (17-gauge) stainless steel, 49mm (1-15/16") diameter and shall fasten over mounting flange to conceal mounting screws.
- Post and mounting flange are to be machined as one piece.
Data sheet
- Abmessungen: Breite: 140 mm Höhe: 115 mm Tiefe: 33 mm
- Typische Montagehöhe: 597 mm
- WC-Rollenhalter aus AISI 304 (V2A) Edelstahl, Oberfläche matt gebürstet.
- Die verdeckte Wandhalterung (5,6 mm stark, Ø 45 mm) ist mit zwei Schraublöchern zur Wandbefestigung versehen sowie einem Außengewinde zur Aufnahme der Abdeckrosette (1,4 mm stark, 13 mm teif, Ø 50 mm), welche mit der Wandhalterung verschraubt wird.
- U-förmiger Bügel (9,5 mm stark) ist im Träger gelagert und durch Madenschraube fixiert.
- Dorn ist mit Bügel fest verpresst.
- Erhältlich in 2 Varianten
Ähnliche Artikel
Zubehör
