B-672/7 stainless steel Bobrick satin brushed or polished finish double robe hook
Bobrick B-672/7 double robe hook Bright-polished stainless steel. Contoured 4" (100mm) wide bar forms hook at each end. Flange is 2" x 2" (50 x 50mm). Projects 2 5⁄16" (60mm) from wall.
| Aantal | Stukprijs |
|---|---|
| Tot 1 |
€ 61,95
|
| Vanaf 2 |
€ 61,10
|
| Vanaf 3 |
€ 60,20
|
| Vanaf 4 |
€ 59,40
|
| Vanaf 5 |
€ 58,50
|
| Vanaf 6 |
€ 57,70
|
| Vanaf 8 |
€ 56,80
|
| Vanaf 10 |
€ 55,95
|
voor levering naar Nederland.
Beschikbaar, Levertijd 2-3 werkdagen
55 Goswell Road 1st Floor Clerkenwell
EC1V 7EN London
Ierland
euoffice@bobrick.com
Herbert Place 25
D02 AY86 Dublin
Ireland
Telephone: +44 (0) 1793 78 45 45
euoffice@bobrick.com
Bobrick surface mounted double robe hook in 2 variants B-672/7 of stainless steel
To remove concealed wall plate from back of flange and mounting bracket, loosen setscrew. Mount wall plate so prongs are at top; secure with two sheet-metal screws, furnished by manufacturer, at points indicated by an S. Engage mounting bracket onto prongs of wall plate, then secure into position by tightening setscrew at bottom of flange. For partitions with particle-board or other solid core, secure with sheet-metal screws furnished, or provide through-bolts, nuts, and washers. For hollow-core metal partitions, provide solid backing into which the furnished sheet-metal screws can be secured. For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws furnished. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws furnished, or provide 1/8" (3mm) toggle bolts or expansion bolts.
- Surface-mounted double robe hook shall be type-304 stainless steel with (insert one: bright polished or satin) finish.
- Flange and support arm shall be 22 gauge (0.8mm) and equipped with a concealed, 16-gauge (1.6mm) mounting bracket that is secured to a concealed, 16-gauge (1.6mm) wall plate with a stainless steel setscrew.
- Cap shall be 10 gauge (3.6mm), welded to the support arm.
- Concealed surface wall mounting
- For partitions with particle-board or other solid core, secure with sheet-metal screws furnished, or provide through-bolts, nuts, and washers.
B-672 - Bright-polished stainless steel
B-6727 - Satin stainless steel
Data sheet
- Surface-mounted double robe hook shall be type-304 stainless steel with (insert one: bright polished or satin) finish.
- Flange and support arm shall be 22 gauge (0.8mm) and equipped with a concealed, 16-gauge (1.6mm) mounting bracket that is secured to a concealed, 16-gauge (1.6mm) wall plate with a stainless steel setscrew.
- Cap shall be 10 gauge (3.6mm), welded to the support arm.
- Concealed surface wall mounting
- For partitions with particle-board or other solid core, secure with sheet-metal screws furnished, or provide through-bolts, nuts, and washers.
