B-677/7 wall mounted universal stainless steel Borbick WC spare roll holder
Bobrick B-677/7 Towel pin Bright-polished stainless steel. Flange is 2" x 2" (50 x 50mm). Projects 3 3⁄8" (85mm) from wall.h.
| Hoeveelheid | Prijs per eenheid |
|---|---|
| Tot 1 |
€ 51,95
|
| Vanaf 2 |
€ 51,10
|
| Vanaf 3 |
€ 50,30
|
| Vanaf 4 |
€ 49,45
|
| Vanaf 5 |
€ 48,60
|
| Vanaf 6 |
€ 47,80
|
| Vanaf 8 |
€ 46,90
|
| Vanaf 10 |
€ 46,10
|
voor levering naar Niederlande.
Beschikbaar, Levertijd 6-10 werkdagen
55 Goswell Road 1st Floor Clerkenwell
EC1V 7EN London
Vereinigtes Königreich
euoffice@bobrick.com
Herbert Place 25
D02 AY86 Dublin
Irland
Telephone: +44 (0) 1793 78 45 45
euoffice@bobrick.com
Bobrick B-677/7 surface mounted towel pin of satin or polished stainless steel
To remove concealed wall plate from back of fl ange and mounting bracket, loosen setscrew. Mount wall plate so prongs are at top; secure with two sheet-metal screws, furnished by manufacturer, at points indicated by an S. Engage mounting bracket onto prongs of wall plate, then secure into position by tightening setscrew at bottom of fl ange. For partitions with particle-board or other solid core, secure with sheet-metal screws furnished, or provide through-bolts, nuts, and washers. For hollow-core metal partitions, provide solid backing into which the furnished sheet-metal screws can be secured. For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws furnished. For other wall surfaces, provide fi ber plugs or expansion shields for use with sheet-metal screws furnished, or provide 1/8" (3mm) toggle bolts or expansion bolts.
- Surface-mounted towel pin shall be type-304 stainless steel with bright polished or satin finish.
- Flange and support arm shall be 22 gauge (0.8mm) and equipped with a concealed, 16-gauge (1.6mm) mounting bracket that is secured to a concealed, 16-gauge (1.6mm) wall plate with a stainless steel setscrew.
- Cap shall be 10 gauge (3.6mm), welded to the support arm.
- Projects 85mm from wall
- Flange50x50 mm
- Also suitable for universal use
- Verdeckte Aufputzmontage.
- Edelstahl hochglanzpoliert oder matt gebürstet CrNi 10/18 (1.4301)
- Steht 85mm von der Wand ab
- Flansch 50x50 mm
- Auch für universellen Einsatz geeignet
Ähnliche Artikel
