Herzlich Willkommen auf Hygiene-shop.eu! ➽ Rabattaktionen & Gutscheine

B-7120 handdryer with white epoxy steel with plastic trim surface mounted

Bobrick B-7120 230V ADA Surface-Mounted Hand Dryer. Durable, 22-gauge, zinc-plated steel with white epoxy cover with black plastic trim, automatic operation, dual air outlets.

Hoeveelheid Basisprijs
tot 1 € 644,93 * € 644,93 * / 1 Stuk(s)
vanaf 2 € 612,68 * € 612,68 * / 1 Stuk(s)
vanaf 4 € 593,34 * € 593,34 * / 1 Stuk(s)
vanaf 6 € 580,44 * € 580,44 * / 1 Stuk(s)
Inhoud: 1 Stuk(s)

Prijzen incl. btw excl. verzendingskosten

Levertijd in 6-10 werkdagen




Angebot anfordern ab einem Gesamt-Warenkorb-Wert von (sonst zur Kasse): € 150,00

Offerte aanvragen
  • BR000076
  • Bobrick
WebwinkelKeur Webwinkel Keurmerk
Bobrick B-7120 surface mounted handdryer with white coated steel cover 230V No-touch...meer

Bobrick B-7120 surface mounted handdryer with white coated steel cover 230V

Bobrick B-7120 surface mounted handdryer with white coated steel cover 230V

No-touch operation: electronic sensor automatically turns dryer on when hands are held under air-outlet opening and across path of sensor. Dual air outlets provide a swirling circulation of airflow for comfortable hand drying. Drying time less than 25 seconds. Remove hands from path of sensor and dryer stops. Dryer operates only when actually drying hands, which saves energy and operating costs. Electronic sensor will automatically shut dryer off 1-1/2 minutes after dryer turns on if an inanimate object, such as tape or chewing gum, is placed across air-outlet opening. After inanimate object is removed, electronic sensor automatically resets itself and dryer operates normally.

- Surface-mounted hand dryer shall have either 22-gauge galvanized steel with exposed surface type-304 stainless steel with #4 satin-finish vertical grain (B-7128) or 22-gauge mild steel zinc plated with high-gloss white epoxy paint finish (B-7120) covers with UL 94-5VA black plastic trim.
- Slim profile cover shall project no more than 4" (100mm) from the finished face of wall to comply with accessible design guidelines (including ADAAG in the U.S.A.).
- Unit shall be equipped with dual air outlets that provide a swirling circulation of airflow for (less then 25 seconds) hand dry.
- Motor shall be 1/7 hp, universal type on resilient mounting with sealed ball bearing at drive-shaft end and self-lubricating sleeve bearing at nondrive end; equipped with automatic thermal-overload switch.
- Heating elements shall be located on outlet side of fan, shall heat air without hot spots, be inaccessible to vandals, and protected by an automatic thermal-overload switch.
- Electronic sensor shall automatically turn dryer on when hands are held under air-outlet opening and across path of sensor.
- Dryer shall turn off automatically when hands are removed.
- Sensor shall automatically shut dryer off approximately 1-1/2 minutes after dryer turns on if an inanimate object is placed across air-outlet opening.
- After inanimate object is removed, electronic sensor shall automatically reset itself and dryer shall operate normally

Dimensions:
width: 350mm
height: 345mm
depth:100mm

Externe inhoud
Op deze plek vindt u externe inhoud van YouTube. Door te klikken op "Externe inhoud laden", stemt u ermee in dat externe inhoud aan u wordt getoond. Hierbij worden persoonlijke gegevens doorgegeven aan het derde platform.
Meer informatie hierover is te vinden in ons privacybeleid en het privacybeleid van YouTube.

Specificaties:

  • Dimensions: width: 350mm height: 345mm depth:100mm
  • Surface-mounted hand dryer shall have either 22-gauge galvanized steel with exposed surface type-304 stainless steel with #4 satin-finish vertical grain (B-7128) or 22-gauge mild steel zinc plated with high-gloss white epoxy paint finish (B-7120) covers with UL 94-5VA black plastic trim.
  • Slim profile cover shall project no more than 4" (100mm) from the finished face of wall to comply with accessible design guidelines (including ADAAG in the U.S.A.).
  • Unit shall be equipped with dual air outlets that provide a swirling circulation of airflow for (less then 25 seconds) hand dry.
  • Motor shall be 1/7 hp, universal type on resilient mounting with sealed ball bearing at drive-shaft end and self-lubricating sleeve bearing at nondrive end; equipped with automatic thermal-overload switch.
  • Heating elements shall be located on outlet side of fan, shall heat air without hot spots, be inaccessible to vandals, and protected by an automatic thermal-overload switch.
  • Electronic sensor shall automatically turn dryer on when hands are held under air-outlet opening and across path of sensor.
  • Dryer shall turn off automatically when hands are removed.
  • Sensor shall automatically shut dryer off approximately 1-1/2 minutes after dryer turns on if an inanimate object is placed across air-outlet opening.
  • After inanimate object is removed, electronic sensor shall automatically reset itself and dryer shall operate normally

Verdere links naar "Bobrick B-7120 surface mounted handdryer with white coated steel cover 230V"
Laatst bekeken
WhatsApp Chat Support
Hygiene-shop.nl WhatsApp Support
WhatsApp Chat Support
Hallo! Hoe kunnen wij u helpen?
Welcome at our shop! Outside our opening hours it might take a little bit longer until we answer yourinquiry.
whatspp icon whatspp icon