B-3888 satin brushed multi roll toilett tissue dispenser for mounting in wall

Bobrick B-3888 recessed multi-roll toilet tissue dispenser of stainless steel

Unit holds two standard-core toilet tissue rolls up to 5-1/4" (133mm) diameter (1800 sheets). Tissue rolls are loaded and locked into dispensing mechanism. Extra roll automatically drops in place when bottom roll is depleted. Depleted rolls can only be removed after unlocking door. 

Provide framed rough wall opening 6-1/4" wide x 11-1/4" high (160 x 290mm). Minimum recessed depth required to finish face of wall is 3-1/8" (80mm). Allow clearance for construction features that may protrude into opening from opposite wall. Coordinate with mechanical engineer to avoid pipes, vents, and conduits. Mount unit with shims between framing and cabinet at all points indicated by an S, then secure unit with sheet-metal screws (not furnished).

- Recessed multi-roll toilet tissue dispenser shall be type-304 stainless steel with welded construction, including dispensing mechanism, inner housing and cam; exposed surfaces shall have satin finish.
- Front of toilet tissue dispenser door shall be drawn, one-piece, seamless construction.
- Door shall be secured to cabinet with two rivets and equipped with a tumbler lock keyed like other Bobrick washroom accessories.
- Flange shall be drawn, one-piece, seamless construction.
- Unit shall dispense two standard-core toilet tissue rolls up to 5-1/4" (133mm) diameter (1800 sheets).
- Extra roll shall automatically drop in place when bottom roll is depleted.
- Unit shall be equipped with two heavy-duty, one-piece, molded ABS spindles.
- Theft-resistant, spindles retained in dispensing mechanism when door is locked.

Dimensions:
width: 190 mm
height: 320 mm
mounting depth: 80 mm
head start: 70 mm
typical mounting height: 730-935 mm
disabled mounting height: 730 mm

wall opening:
width: 160 mm
height: 285 mm
mounting depth: 85 mm
head start: n.z.
typical mounting height: 710-915 mm
disabled mounting height: 710 mm

Data sheet