Towel bar of stainless steel satin brushed Bobrick B-6747x24 for surface mounting

Bobrick B-6747x24 stainless steel surface mounted square towel bar satin brushed

To remove concealed wall plates from back of fl anges and mounting brackets, loosen setscrews. Mount each wall plate so prongs are at top; secure with sheet-metal screws, furnished by manufacturer, at points indicated by an S. Engage mounting brackets onto prongs of wall plates, then secure into position by tightening setscrews at bottom of fl anges. Note: Center-to-center of concealed wall plates must be within 1/16" (1.6mm) of the bar length dimension. For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws furnished. For other wall surfaces, provide fi ber plugs or expansion shields for use with sheet-metal screws furnished, or provide 1/8" (3mm) toggle bolts or expansion bolts.

- Surface-mounted towel bar shall be type-304 stainless steel.
- Flanges and support arms shall be 22 gauge (0.8mm) and equipped with concealed, 18-gauge (1.8mm) mounting brackets that are secured to concealed, 16-gauge (1.6mm) wall plates with stainless steel locking setscrews.
- Towel bar shall be round 3/4" (19mm) diameter tubing.
- Flanges and Support Arms (2) — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. Each fl ange has a concealed, 16-gauge (1.6mm) stainless steel mounting bracket. All-welded construction. Secured to wall plates with stainless steel locking setscrews.
- Concealed Wall Plates (2) — 18-8 S, type-304, 16-gauge (1.6mm) stainless steel.
- Towel Bar — 18-8 S, type-304, heavy-gauge stainless steel. Round 3/4" (19mm) diameter tubing.

Data sheet
​