B-686/7 WC double roll tissue dispenser of stainless steel for wall mounting
Bobrick surface mounted double roll tissue dispenser B.686/7 of stainless steel
| Hoeveelheid | Basisprijs | |
|---|---|---|
| tot 1 | € 135,10 * | € 135,10 * / 1 Stuk(s) |
| vanaf 2 | € 128,34 * | € 128,34 * / 1 Stuk(s) |
| vanaf 4 | € 124,29 * | € 124,29 * / 1 Stuk(s) |
| vanaf 6 | € 121,59 * | € 121,59 * / 1 Stuk(s) |
Prijzen incl. btw excl. verzendingskosten
Levertijd in 6-10 werkdagen
Großbritannien
- Artikelnr.: BR000092-1
-
Fabrikant: Bobrick
Bobrick surface mounted double roll tissue dispenser B.686/7 of stainless steel
Bobrick surface mounted double roll tissue dispenser B.686/7 of stainless steel
To remove concealed wall plates from back of flanges and mounting brackets, loosen setscrews. Mount each wall plate with prongs at top; secure with sheet-metal screws furnished by manufacturer at points indicated by an S. Engage mounting brackets onto prongs of wall plate, then secure into position by tightening setscrews at bottom of flanges. Note: Center-to-center of concealed wall plates must be within 1/16'' (1.6mm) of dimension shown. For partitions with particle-board or other solid core: Secure with sheet-metal screws furnished by manufacturer or provide through-bolts, nuts, and washers. For hollow-core metal partitions: Provide solid backing into which the furnished sheet-metal screws can be secured. If two units are installed back-to-back, then provide threaded sleeves and machine screws for the full thickness of partition. For masonry walls: Provide fiber plugs or expansion shields for use with sheet-metal screws furnished by manufacturer, or provide 1/8'' (3mm) toggle bolts or expansion bolts. For plaster or dry wall construction: Provide concealed backing to comply with local building codes, then secure the unit with sheet-metal screws furnished.
- Double-roll toilet tissue dispenser shall be type-304 stainless steel with insert one: bright polished or satin) finish.
- Unit shall accommodate two standard-core toilet paper rolls up to 5-1/2'' (140mm) diameter (1800 sheets).
- Flanges shall be equipped with concealed, 16‑gauge (1.6mm) stainless steel mounting brackets that are secured to concealed stainless steel wall plates with stainless steel setscrews.
- *Spindles shall be equipped with a heavy-duty internal spring
- *To specify theft-resistant spindles as an optional accessory, add to specification: Theft-resistant spindles shall be removable only with special key provided.
Dimensions:
width: 320 mm
height: 50 mm
depth: 100 mm
typical mounting height: 500 mm
Data sheet
Specificaties:
- Dimensions: width: 320 mm height: 50 mm depth: 100 mm typical mounting height: 500 mm
- Double-roll toilet tissue dispenser shall be type-304 stainless steel with insert one: bright polished or satin) finish.
- Unit shall accommodate two standard-core toilet paper rolls up to 5-1/2'' (140mm) diameter (1800 sheets).
- Flanges shall be equipped with concealed, 16‑gauge (1.6mm) stainless steel mounting brackets that are secured to concealed stainless steel wall plates with stainless steel setscrews.
- *Spindles shall be equipped with a heavy-duty internal spring
- *To specify theft-resistant spindles as an optional accessory, add to specification: Theft-resistant spindles shall be removable only with special key provided.
