Coat hooks available in stainless steel satin brushed or polished finish
Bobrick B-671/7 bright-polished stainless steel. Flange is 2" x 2" (50 x 50mm). Hook is 1 1⁄4" high, 1 1⁄4" wide (30 x 30mm). Projects 2" (50mm) from wall.
| Hoeveelheid | Basisprijs | |
|---|---|---|
| tot 1 | € 49,16 * | € 49,16 * / 1 Stuk(s) |
| vanaf 2 | € 46,70 * | € 46,70 * / 1 Stuk(s) |
| vanaf 4 | € 45,22 * | € 45,22 * / 1 Stuk(s) |
| vanaf 6 | € 44,24 * | € 44,24 * / 1 Stuk(s) |
Prijzen incl. btw excl. verzendingskosten
Levertijd in 6-10 werkdagen
- Artikelnr.: BR000117-1
-
Fabrikant: Bobrick
Bobrick surface mounted single robe hook B-671/7 of stainless steel
Bobrick surface mounted single robe hook B-671/7 of stainless steel
To remove concealed wall plate from back of flange and mounting bracket, loosen setscrew. Mount wall plate so prongs are at top; secure with two sheet-metal screws, furnished by manufacturer, at points indicated by an S. Engage mounting bracket onto prongs of wall plate, then secure into position by tightening setscrew at bottom of flange. For partitions with particle-board or other solid core, secure with sheet-metal screws furnished, or provide through-bolts, nuts, and washers. For hollow-core metal partitions, provide solid backing into which the furnished sheet-metal screws can be secured. For masonry wall, provide fiber plugs or expansion shields for use with sheet-metal screws furnished, or provide 1/8" (3mm) toggle bolts or expansion bolts. For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws furnished.
- Surface-mounted robe hook shall be type-304 stainless steel with (insert one: bright polished, bright polished brass, or satin) finish.
- Flange shall be 22 gauge (0.8mm) and equipped with concealed, 16-gauge (1.6mm) mounting bracket that is secured to concealed, 16-gauge (1.6mm) wall plate with a stainless steel setscrew.
- Cap shall be 10 gauge (3.6mm), welded to support arm.
B-671 - Bright-polished stainless steel
B-6717 - Satin finish stainless steel
Data sheet
Specificaties:
- Surface-mounted robe hook shall be type-304 stainless steel with (insert one: bright polished, bright polished brass, or satin) finish.
- Flange shall be 22 gauge (0.8mm) and equipped with concealed, 16-gauge (1.6mm) mounting bracket that is secured to concealed, 16-gauge (1.6mm) wall plate with a stainless steel setscrew.
- Cap shall be 10 gauge (3.6mm), welded to support arm.
- Available in stainless steel satin brushed or polished finish
- To remove concealed wall plate from back of flange and mounting bracket, loosen setscrew.
