Handdryer with timless design B-7128 surface mounted satin brushed stainless steel
Bobrick B-7128 handdryer ADA Surface-Mounted Hand Dryer, Durable, 22-gauge, Type 304 satin-finish stainless steel cover with black plastic trim, automatic operation, dual air outlets.
| Aantal | Stukprijs |
|---|---|
| Tot 1 |
€ 784,00
|
| Tot 2 |
€ 773,15
|
| Tot 3 |
€ 762,40
|
| Tot 4 |
€ 751,60
|
| Tot 5 |
€ 740,85
|
| Tot 7 |
€ 730,05
|
| Tot 9 |
€ 719,30
|
| Vanaf 10 |
€ 708,50
|
voor levering naar Nederland.
Beschikbaar, Levertijd 6-10 werkdagen
55 Goswell Road 1st Floor Clerkenwell
EC1V 7EN London
Ierland
euoffice@bobrick.com
Herbert Place 25
D02 AY86 Dublin
Ireland
Telephone: +44 (0) 1793 78 45 45
euoffice@bobrick.com
Bobrick B-7128 handdryer for surface mounting satin brushed stainless steel 230V
No-touch operation: electronic sensor automatically turns dryer on when hands are held under air-outlet opening and across path of sensor. Dual air outlets provide a swirling circulation of airflow for comfortable hand drying. Drying time less than 25 seconds. Remove hands from path of sensor and dryer stops. Dryer operates only when actually drying hands, which saves energy and operating costs. Electronic sensor will automatically shut dryer off 1-1/2 minutes after dryer turns on if an inanimate object, such as tape or chewing gum, is placed across air-outlet opening. After inanimate object is removed, electronic sensor automatically resets itself and dryer operates normally.
Dimensions:
width: 350mm
height: 345mm
depth: 100mm
- Surface-mounted hand dryer shall have either 22-gauge galvanized steel with exposed surface type-304 stainless steel with #4 satin-finish vertical grain (B-7128) or 22-gauge mild steel zinc plated with high-gloss white epoxy paint finish (B-7120) covers with UL 94-5VA black plastic trim.
- Slim profile cover shall project no more than 4" (100mm) from the finished face of wall to comply with accessible design guidelines (including ADAAG in the U.S.A.).
- Unit shall be equipped with dual air outlets that provide a swirling circulation of airflow for (less then 25 seconds) hand dry.
- Motor shall be 1/7 hp, universal type on resilient mounting with sealed ball bearing at drive-shaft end and self-lubricating sleeve bearing at nondrive end; equipped with automatic thermal-overload switch.
- Heating elements shall be located on outlet side of fan, shall heat air without hot spots, be inaccessible to vandals, and protected by an automatic thermal-overload switch.
- Electronic sensor shall automatically turn dryer on when hands are held under air-outlet opening and across path of sensor.
- Dryer shall turn off automatically when hands are removed. Sensor shall automatically shut dryer off approximately 1-1/2 minutes after dryer turns on if an inanimate object is placed across air-outlet opening.
- After inanimate object is removed, electronic sensor shall automatically reset itself and dryer shall operate normally
- Dimensions: width: 350mm height: 345mm depth: 100mm
- Slim profile cover shall project no more than 4" (100mm) from the finished face of wall to comply with accessible design guidelines (including ADAAG in the U.S.A.).
- Unit shall be equipped with dual air outlets that provide a swirling circulation of airflow for (less then 25 seconds) hand dry.
- Motor shall be 1/7 hp, universal type on resilient mounting with sealed ball bearing at drive-shaft end and self-lubricating sleeve bearing at nondrive end; equipped with automatic thermal-overload switch.
- Heating elements shall be located on outlet side of fan, shall heat air without hot spots, be inaccessible to vandals, and protected by an automatic thermal-overload switch.
- Electronic sensor shall automatically turn dryer on when hands are held under air-outlet opening and across path of sensor.
Ähnliche Artikel
