Infrared paint dryer in 2 variants with standard control board 6000W - Heatlight

Description

The 6000 model has six Shortwave 1 KW GC lamps, fitted into six individual cassettes.

This flexible system allows each cassette to be adjusted and locked into position around the contours of the vehicle body, ensuring maximum area coverage.

Height adjustment is made using the high performance locking gas strut, offering a near weightless movement to the cassette support arm.

There are 3 different Control boards available to suit you individual needs. From a basic complete cycle board with twin timers and 0 - 100% power control through to fully electronic digital temperature feed back control board.

Advantages:

✔ 500mm 1.0Kw High output shortwave GC lamps in each cassette

✔ Long lamp/emitter life with an average of 6000hours

✔ Robust steel constructed stable frame, fitted with rear  wheel locking castors

✔ Maintenance free cassettes with no fan or filters to change / maintain

✔ Easy height adjustment by locking gas strut

✔ Individually switched cassettes

✔ Cassettes can be used horizontal or vertical.

Specifications

Area coverage 2000mm x 1000mm

Minimum operating distance 500mm

Max vertical curing height 2030mm

Max horizontal curing height 1800mm

Electrical specification

220 - 240Volt 6KW 50Hz single phase 25amps

or 380 - 415Volt 6KW 50Hz  3 phase 8.33amps per phase

Average Curing Times:

Filler / Stopper    4 - 6minutes

Primer                  6 - 8minutes

Base Coat           5 - 8minutes

Top Coat              8 - 12minutes

Clear Coat           6 - 10minutes

Standard Control Board

Flash and Bake cycles.

0  - 100% variable heat control on both Flash and Bake cycles.

0 - 30 minute timers on both the Flash and Bake settings.

Auto turn off at end of cycle.

Data sheet (English):

Exploring Infrared Opportunities

We have worked in close association with the motor trade to produce effective and versatile product that is readily accepted by the paint spray personnel who actually use the equipment. We are currently the only manufacturer in the UK of infrared paint driers.

Quality

Unlike companies who import from Asia, the Victory systems are fully compliant. Fully CE and RoHS certified you can be sure that you are not in breach of European Law by handling and stocking our products. Victory works in accordance with ISO-9001. Look for our UK flag – our quality logo.

Infrared

We use short wave infrared. This is the most environmentally efficient use of energy for paint drying. Efficiency increases of up to 90% are made over conventional systems plus drying times cut from typically 45 minutes to 10 minutes. Faster throughput and lower energy costs give a rapid return on investment. Victory short wave lamps are specifically tuned for paint drying and in normal use will comfortably last 20,000 hours.

Efficiency

Even heat distribution over the widest possible target area leads to high efficiency and to the best paint finish.  We have designed the parabolic reflector used in all the VLP systems to maximise efficiency. Asian products appearing on the market have copies of old designs with poor materials and lower efficiency. Our  parabolic reflector gives a totally uniform heat pattern. Unlike other European competitors the cassettes can be profiled to the curves of the target.

Serviceability

Our paint dryers are very robust and durable. They have been designed with the user in mind. All critical parts like lamps and reflectors are extremely easy to access for cleaning and replacement.