Stainless steel hat- coat hook bright polished or satin brushed finish B-682 / 7
Bobrick B-682 / B-6827 Hat and Coat Hook Bright-polished stainless steel. Flange is 2" x 2" (50 x 50mm). Hook 1" W, 6 1⁄2" H (25 x 165mm); projects 31⁄16" (80mm) from wall. Concealed wall plate.
| Hoeveelheid | Prijs per eenheid |
|---|---|
| Tot 1 |
€ 65,20
|
| Vanaf 2 |
€ 64,30
|
| Vanaf 3 |
€ 63,40
|
| Vanaf 4 |
€ 62,50
|
| Vanaf 5 |
€ 61,60
|
| Vanaf 6 |
€ 60,75
|
| Vanaf 8 |
€ 59,85
|
| Vanaf 10 |
€ 58,95
|
voor levering naar Niederlande.
Levertijd 20-60 werkdagen
55 Goswell Road 1st Floor Clerkenwell
EC1V 7EN London
Vereinigtes Königreich
euoffice@bobrick.com
Herbert Place 25
D02 AY86 Dublin
Irland
Telephone: +44 (0) 1793 78 45 45
euoffice@bobrick.com
Bobrick B-682 / 7 hat and coat hook of stainless steel available in 2 variants
To remove concealed wall plate from back of flange and mounting bracket, loosen setscrew. Mount wall plate so prongs are at top; secure with two sheet-metal screws, furnished by manufacturer, at points indicated by an S. Engage mounting bracket onto prongs of wall plate, then secure into position by tightening setscrew at bottom of flange. For partitions with particle-board or other solid core, secure with sheet-metal screws furnished, or provide through-bolts, nuts, and washers. For hollow-core metal partitions, provide solid backing into which the furnished sheet-metal screws can be secured. For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws furnished. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws furnished, or provide 1/8" (3mm) toggle bolts or expansion bolts.
- Surface-mounted hat and coat hook shall be type-304 stainless steel with bright polished or satin finish.
- Flange and support arm shall be 22 gauge (0.8mm) and equipped with a concealed, 16-gauge (1.6mm) mounting bracket that is secured to a concealed, 16-gauge (1.6mm) wall plate with a stainless steel setscrew.
- Hook shall be 12 gauge (2.8mm), welded to the support arm.
- B-682 - Bright-polished stainless steel
- B-6827 - Satin stainless steel
Data sheet
- Haken 25 mm breit, 165 mm hoch.
- Flansch 50 x 50 mm.
- Steht 80 mm von der Wand ab.
- B-682 - Edelstahl hochglanzpoliert
- B-6827 - Edelstahl matt geschliffen
Ähnliche Artikel
