Toilet article shelf 610mm long of bright polished stainless steel B-638
Bobrick B-683 Surface-Mounted Toiletry Shelf 24" length (610mm). Bright-polished stainless steel. Shelf 4 3⁄4" (120mm) wide, projects 5 3⁄4" (145mm) from wall. Edges are roll-formed for safety.
| Hoeveelheid | Prijs per eenheid |
|---|---|
| Tot 1 |
€ 149,10
|
| Vanaf 2 |
€ 147,05
|
| Vanaf 3 |
€ 145,00
|
| Vanaf 4 |
€ 142,95
|
| Vanaf 5 |
€ 140,90
|
| Vanaf 6 |
€ 138,85
|
| Vanaf 8 |
€ 136,85
|
| Vanaf 10 |
€ 134,75
|
voor levering naar Nederland.
Beschikbaar, Levertijd 6-10 werkdagen
55 Goswell Road 1st Floor Clerkenwell
EC1V 7EN London
Ierland
euoffice@bobrick.com
Herbert Place 25
D02 AY86 Dublin
Ireland
Telephone: +44 (0) 1793 78 45 45
euoffice@bobrick.com
Bobrick B-683 surface mounted bright polished stainless steel shelf
To remove concealed wall plates from back of flanges and mounting brackets, loosen setscrews. Mount each wall plate so prongs are at top; secure with sheet-metal screws, furnished by manufacturer, at points indicated by an S. Engage mounting brackets onto prongs of wall plates, then secure into position by tightening setscrews at bottom of flanges. Note: Center-to-center of concealed wall plates must be within 1/16" (1.6mm) of the bar length dimension. For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws furnished. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws furnished, or provide 1/8" (3mm) toggle bolts or expansion bolts.
- Surface-mounted shelf shall be type-304 stainless steel with bright polished finish.
- Flanges and support arms shall be 22 gauge (0.8mm) and equipped with concealed, 16-gauge (1.6mm) mounting brackets that are secured to concealed, 16-gauge (1.6mm) wall plates with stainless steel setscrews.
- Shelf shall be 22 gauge (0.8mm) with roll-formed edges.
Dimensions:
610 mm long
shelf 120 mm deep
Stands 145 mm from the wall
Data sheet
- Dimensions: 610mm long, shelf 120 mm deep, Stands 145 mm from wall
- Surface-mounted shelf shall be type-304 stainless steel with bright polished finish.
- Flanges and support arms shall be 22 gauge (0.8mm) and equipped with concealed, 16-gauge (1.6mm) mounting brackets that are secured to concealed, 16-gauge (1.6mm) wall plates with stainless steel setscrews.
- Shelf shall be 22 gauge (0.8mm) with roll-formed edges.
Ähnliche Artikel
