Towel bar of stainless steel satin brushed Bobrick B-6737x24 for surface mounting
Bobrick B-6737x24 Surface Mounted Towel Bar of satin brushed stainless steel. Concealed mounting with help of flanges.
| Aantal | Stukprijs |
|---|---|
| Tot 1 |
€ 107,30
|
| Tot 2 |
€ 105,80
|
| Tot 3 |
€ 104,30
|
| Tot 4 |
€ 102,85
|
| Tot 5 |
€ 101,40
|
| Tot 7 |
€ 99,90
|
| Tot 9 |
€ 98,40
|
| Vanaf 10 |
€ 96,95
|
voor levering naar Nederland.
Beschikbaar, Levertijd 10-14 werkdagen
55 Goswell Road 1st Floor Clerkenwell
EC1V 7EN London
Ierland
euoffice@bobrick.com
Herbert Place 25
D02 AY86 Dublin
Ireland
Telephone: +44 (0) 1793 78 45 45
euoffice@bobrick.com
Bobrick B-6737x24 stainless steel surface mounted square towel bar satin brushed
To remove concealed wall plates from back of flanges and mounting brackets, loosen locking setscrews. Mount each wall plate so prongs are at top; secure with two sheet-metal screws, furnished by manufacturer, at points indicated by an S. Engage mounting brackets onto prongs of wall plates, then secure into position by tightening locking setscrews at bottom of flanges. Note: Centerline-to-centerline of concealed wall plates must be within 1/16" (1.6mm) of the Y dimension given. For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with screws furnished. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws furnished, or provide 1/8" (3mm) toggle bolts or expansion bolts.
- Surface-mounted towel bar shall be type-304 stainless steel.
- Flanges and support arms shall be 22 gauge (0.8mm) and equipped with concealed, 16-gauge (1.6mm) mounting brackets that are secured to concealed, 16-gauge (1.6mm) wall plates with locking setscrews.
- Towel bar shall be 3/4" (19mm) square tubing.
- Flanges and Support Arms (2) — 18-8, type-304, 22-gauge (0.8mm) stainless steel. Each flange has concealed, 16-gauge (1.6mm) stainless steel mounting bracket. All-welded construction. Secured to wall plates with stainless steel locking set-screws.
- Concealed Wall Plates (2) — 18-8, type-304, 16-gauge (1.6mm) stainless steel.
- Towel Bar — 18-8, type-304, heavy-gauge stainless steel. Lockseam rolled, 3/4" (19mm) square tubing.
Data sheet
- Surface-mounted towel bar shall be type-304 stainless steel.
- Flanges and support arms shall be 22 gauge (0.8mm) and equipped with concealed, 16-gauge (1.6mm) mounting brackets that are secured to concealed, 16-gauge (1.6mm) wall plates with locking setscrews.
- Towel bar shall be 3/4" (19mm) square tubing.
- Flanges and Support Arms (2) — 18-8, type-304, 22-gauge (0.8mm) stainless steel. Each flange has concealed, 16-gauge (1.6mm) stainless steel mounting bracket. All-welded construction. Secured to wall plates with stainless steel locking set-screws.
- Concealed Wall Plates (2) — 18-8, type-304, 16-gauge (1.6mm) stainless steel.
- Towel Bar — 18-8, type-304, heavy-gauge stainless steel. Lockseam rolled, 3/4" (19mm) square tubing.
Ähnliche Artikel
