WC Bobrick single roll toilet tissue dispenser available in two variants
Bobrick B-685/7 Bright-polished stainless steel. Support-arm flanges lock to concealed stainless steel wall plate. Chrome-plated plastic spindle holds rolls up to 5 1⁄2" (140mm) diameter (1800 sheets). Unit 7 1⁄4" W, 2" H (185 x 50mm); projects 3 15⁄16" (100mm) from wall.
| Aantal | Stukprijs |
|---|---|
| Tot 1 |
€ 96,40
|
| Vanaf 2 |
€ 95,10
|
| Vanaf 3 |
€ 93,80
|
| Vanaf 4 |
€ 92,45
|
| Vanaf 5 |
€ 91,10
|
| Vanaf 6 |
€ 89,80
|
| Vanaf 8 |
€ 88,45
|
| Vanaf 10 |
€ 87,15
|
voor levering naar Nederland.
Beschikbaar, Levertijd 6-10 werkdagen
55 Goswell Road 1st Floor Clerkenwell
EC1V 7EN London
Ierland
euoffice@bobrick.com
Herbert Place 25
D02 AY86 Dublin
Ireland
Telephone: +44 (0) 1793 78 45 45
euoffice@bobrick.com
Bobrick surface mounted single roll toilet tissue dispenser for B-685/7
To remove concealed wall plates from back of flanges and mounting brackets, loosen setscrews. Mount each wall plate with prongs at top; secure with sheet-metal screws, furnished by manufacturer, at points indicated by an S. Engage mounting brackets onto prongs of wall plate, then secure into position by tightening setscrews at bottom of flanges. Note: Center-to-center of concealed wall plates must be within 1/16'' (1.6mm) of dimension shown. For partitions with particle-board or other solid core, secure with sheet-metal screws furnished, or provide through-bolts, nuts, and washers. For hollow-core metal partitions, provide solid backing into which the furnished sheet-metal screws can be secured. For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws furnished. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws furnished, or provide 1/8'' (3mm) toggle bolts or expansion bolts.
- Single-roll toilet tissue dispenser shall be type-304 stainless steel with bright polished or satin finish.
- Unit shall accommodate one standard-core toilet paper roll up to 5-1/2'' (140mm) diameter (1800 sheets).
- Flanges and support arms shall be 22- gauge (0.8mm) and equipped with concealed, 16-gauge (1.6mm) mounting brackets that are secured to concealed, 16-gauge (1.6mm) wall plates with stainless steel setscrews.
- *Spindle shall be chrome-plated plastic with a heavyduty internal spring
Dimensions:
width: 185 mm
<
- Dimensions: width: 185 mm height: 50 mm depth: 100 mm typical mounting height: 500 mm
- Single-roll toilet tissue dispenser shall be type-304 stainless steel with bright polished or satin finish.
- Unit shall accommodate one standard-core toilet paper roll up to 5-1/2'' (140mm) diameter (1800 sheets).
- Flanges and support arms shall be 22- gauge (0.8mm) and equipped with concealed, 16-gauge (1.6mm) mounting brackets that are secured to concealed, 16-gauge (1.6mm) wall plates with stainless steel setscrews.
- *Spindle shall be chrome-plated plastic with a heavyduty internal spring
